2002 Aurora: how do you change the bulbs/LEDs for radio controls, steering wheel controls, dash...
(More)
2002 Aurora: how do you change the bulbs/LEDs for radio controls, steering wheel controls, dash lights?
97 aurora. ive replaced rack and pinion ps pump all the pressue lines to pump and rack. i still have...
(More)
97 aurora. ive replaced rack and pinion ps pump all the pressue lines to pump and rack. i still have bubbles in pump and a bearing whinding noise from pump(air in system) i bled and bled still bubble. everything is new(oem) i need help
this is a tip for all those who are looking for free diagrams, free diagrams are very hard to get... allthough most of us have access to diagrams,...
written by jaysonemanme
This is the reset proceedure for a 2008 Highlander with a key-type ignition: Turn the key ON, do not start the engine. Look at the odometer, and...
written by Toyota Ed
There is a known issue with the 2005-2007 Corolla automatic transmission shift logic. The shift points may seem harsh, and the Check Engine light may...
written by Toyota Ed
There are two jam switches located on the latch assymbly. One on top and one at the bottom. They can become dirty and not function properly causing...
written by dlmcmasters
Believe it or not, it is normal for these engines to use about a quart every 2000 even when they are essentially new. Note that I said,...
written by chiquititas
I will explain this better! Turn off the radio and turn the key to the on position. Press and hold DISP knob, when info comes on window press the seek...
written by DAD5bbbbg
I just bought a 2008 jeep wrangler and my hood is lifting 2 to 3 inches off the frame when I'm driving on the highway in wind speeds over 15 to 20...
written by newmdog