1998 Oldsmobile Aurora "blend door actuators" Questions

blend door actuator, in order to check for a clogged core feel the heater core hoses in the eng compartment, they should both be hot, one a little hotter than the other, if they are the core is ok and

...blend door actuator on dash all switches work ac and heat only blows on floor when turn of knob vents on top or windshield vent don't work only bottom vent works no matter what position set on ...

I am getting no defrosters or heat and no Air conditioning. That pannel on the dash is not working. ????? Sounds like a bad heater blend door actuator.Check fuses first.

...on driver side 2 vents is working great, 2 vents on passenger side and rear blowing out hot air. this just started. Car has 98,000 miles. needs a new temp blend door actuator( dealer only

...problem. Most likely a blend air door problem. Could be bad actuator, bad seal or just a vacuum leak. This can be hard to access, and may require removal of much or all of the dash. Use a shop

...mode aids in clearing the windows, the cool dry air mixed in with the defrost help clear the windows faster. You could have a bad thermostat or a plugged heater core, or a bad blend door

...door blend actuator on 2009 lincoln mks Right side or left ? Electronic Automatic Temperature Control or manual ? Temperature or mode door ? Temperature Blend Door Actuator - LH Removal and ...

...blend door actuator location and removal, please? 1996 Chevy 1500 blend door actuator location and what needs to be removed? Thanks. 1996 Chevrolet K1500 Air Blend Door Actuator Advance Auto Parts ...

...blend door actuator (10). Blend door actuator and related components Remove the blend door actuator mounting screws from the HVAC module. Remove the blend door actuator as an assembly with the ...

...blend door actuator on 2006 mercury mountaineer auto controls, 6 cylinder Temperature Blend Door Actuator - RH, EATC Removal and Installation Remove the RH floor console finish panel. Lower the glove ...