headlight problems with my 2008 chevy equinox i had to already change the headlights a couple of times now I have just replaced one again and it will not work. Are there any other things I can do to ...
headlights I have had to replace the headlights a couple of times already and now after replacing one again it will not work. What else could the problem be? also the lens on one of the headlights ...
Question about Chevrolet Equinox
2005 Chevy equinox when releasing the emergency brake and the headlight switch is on auto the lights come on automatically except the tail lights. You probably have daytime running lights - when you ...
...and off about 4 times then goes out. Hiya... When this happens, it means one or two of the halogen headlight bulb(s) has been burnt-out. Do this quick and easy self-test: Turn on the headlight
Question about Chevrolet Equinox
2007 Chevrolet Equinox headlight won't go off even with the engine is off The headlight won't go off even with the engine off.In addition, the high beam is not working as well. check ...
...and is is a serious problem I would take it to your local Machanic to get scanned. This could be a headlight out, or a major problem with the truck. PS. try checking the headlights and common
headlights the low beam does not work and keeps blowing fuses on the side that was replaced. what can the problem be and is there a drl relay module in this car and where isit? Sounds like there is a ...
running lights don't turn on. indicator lamp flashes then goes out and headlights don't turn on two things to consider here-has this car been in a front end collision and have you checked to see if ...
Question about Chevrolet Equinox
...dash board come on I am not sure, but this fixed it. Hiya It's a signal that tells you the low-beam headlight bulb has burnt-out....the green headlight logo only works when both low-beam bulbs are ...
Question about Chevrolet Equinox
HOW DO I PREVENT AND GET RID OF CONDENSATION IN HADLIGHT ASSY Condensation in a headlight assembly usually means a crack or split in the assembly somewhere.Remove the assembly and use a hair dryer to ...
2,949 questions posted
Usually answered in minutes!
446 Questions
159 Questions
127 Questions
73 Questions
52 Questions