Question about Buick Century
...it will be fine for awile Have the vehicle scanned. If you have a code for Maximum Adapt/Long shift, replace the EPC pressure control solenoid. This is a real common failure on the 4t65e
...shift and maximum adaptation limit reached It means that PCM have found long shift and the adaptation pressure is at maximum Seal cut, clutch worn out. and so on overhaul trans. check oil level ...
...monte thunk when shifting gears Sounds like the Transmission Pressure Control Solenoid is bad. Have you had it scanned for codes? See if a code is stored in the PCM for Maximum adapt and long ...
maximum adaptive and long term shift conditions.see this code transmission fluid is low and contaminated.change transmission fluid and filter see if this help your problem.you need to fix this problem
Question about Buick Cars & Trucks
...maximum shift adaptation and long shift detected. The possible causes are long - clogged transmission filter cut seal on transmission filter low or burnt fluid 1-2 accumulator faulty 2-3 accumulator ...
...Clutch Circuit Stuck On (transmission area) P1811: Maximum Adapt and Long Shift 2.4L and 3.1L (transmission area) You need to talk to a transmission specialist. IS IT LOCATED IN OR ON THE ...
...maximum adapt and long shift this code is a pressure control solenoid code, I have repaired this many times by removing the transmission sidecover and valve body, cleaning the valve body, and ...
...transmission be gone? was the code for something like "maximum adapt"? this is a common issue, and it is a solenoid pack issue. have a good trans shop run a diagnostic, may be cheaper then you
what does error code P1881 and P1811 mean? P1811 Maximum Adapt And Long Shift
...while. Have the vehicle scanned. If you have a code in the computer for maximum adapt/ long shift, replace the EPC pressure control solenoid. This a real common problem on the 4t65e
1,095 questions posted
Usually answered in minutes!
921 Questions
813 Questions
785 Questions
797 Questions
554 Questions
