What size bolt holds the brake and caliper on a 99 Volkswagon Passat For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads ...
...from the harness. Counterhold the lower sliding pin using a thin open-end wrench and remove the caliper-to-sliding pin hex bolt. Pivot the caliper upward or if necessary remove the upper ...
...inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake ...
...inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake ...
2003 vw passat.How can I compress rear brake caliper to change the pads.MIKE you need a special tool which fits into the two slots on the caliper and rotates while applying pressure to return the ...
...sockets, 10-19mm will be more than enough, and you'll need an 8mm Allen bit as well, to remove the caliper mounting bolts (these anchor the caliper to the caliper carrier). If you're doing rear ...
Removing front calipers to 2003 vw passat w8 cannot get calipers off to change front brake pads to 2003 vw passat w8. Cannot get any size alum tool to work, inside of screw holding caliper on is ...
Rear brakes need pads, with calipers, and rotor. Why do I need calipers with only 30,000 miles? Is Volkswagon dealer only the place to install calpers wtih a special tool, not at other brake shops??? ...
2006 passat caliper assembly I hate plastic on cars. I change the brakes on my 2006 passat. 50% of the caliper assembly is plastic. the flange where the plastic is screwed to the metal caliper ...
1,086 questions posted
Usually answered in minutes!
1,322 Questions
1,089 Questions
831 Questions
844 Questions
496 Questions