2005 Nissan Altima "change cv joint left front" Questions

...change brand of springs? Thanks In absolute honesty. Am not a fan of lowering cars coz it knocks **** out of the suspension but........ It sounds like you have something called a CV Joint thats worn ...

...CV joint itself then the labor to remove the axle, change the joint and install it is a big pain. Changing just the CV joint is labor intensive and you could run in to problems. Don't risk it, but a ...

...CV joint. This is located under the front of the car - it is the transaxel to drive the car with front wheel drive. There are two of them - right and left. It is most likely the left CV joint or the ...

cv joint on right front is pretty loose like i can wobble it with my hand-could this be the source of my noise's? i was told that the inner cv joint has lots of play. but this much? also left inner cv

change the RIGHT? Let's say this: If turning RIGHT stops the noise, it's the RIGHT one that's likely bad. If turning LEFT stops the noise, it's the LEFT one that's more likely bad. Make sense? Turning

...left front wheel when turning and backing up. Had new ball joints and cv joints installed. Also had fluid changed in the front and rear diferential.Any help would be appreciated.....Thanks. The noise ...

...cv joint but jack up wheels and move tire up down and left right up down if play check ball joints /anti-sway bar bushings--------if play left to right than check idler arms and steering system /and ...

...for the click. Could be a bad brake or caliper. Or a bad wheel bearing. Could also be a CV joint on the right front drive axle. CV joint usually makes a more deep sound, like clunks. Hope this

...Do you any clue what can cause this??? It's sounds like a CV joint severly warn out but I changed but??? I recently had the same problem, it ended up being the front stabilizers and the drive

...cv joint popping.I did notice spot just below inner cv that appeared to be something scrubbing but only thing there is the cv joint. Only makes the on acceleration and only then when wheels are not ...