1996 Pontiac Grand Am "remove center console armrest cover" Questions

Ad

...center of the car under the radio. There are 7 screws holding the cover on. Once you remove the 7 screws, there are two straps that hold the core in the heater box (2 screws per strap. Some cars are ...

Ad

...center of the car under the radio. There are 7 screws holding the cover on. Once you remove the 7 screws, there are two straps that hold the core inthe heater box (2 screws per strap. Some cars are ...

Ad

Question about Pontiac Grand Am

1 Answer

...remove the center console Base Console, Floor, Ranger, Explorer Removal and Installation Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining ...

...remove and replace the center armrest I am assuming you are talking about the front center armrest here. You have to start by removing the back cover of the center console along with the vent louvres ...

remove center console to replace seat belt. After removing 12 screws, console is still firmly in place. What else has to be done? Remove the two oval covers from the sides of the floor console. Remove

...remove the center armrest console froma ford escape 2002 model hi i would like to remove the center armrest console due to a card fell under it. there are about 8 torx screws (very small) near the ...

Question about Pontiac Grand Am

1 Answer

...Remove the center console.(2 bolts under armrest and 4 screws-2 on either side of the console) 8-Disconnect the wiring harnesses on either side of dash.(White and black connectors. 2 on driver 1 on ...

Remove the storage tray from underneath the center console armrest and leave the armrest cover open. 3. Grab the center console finish panel near the cupholders and pull straight up.4. Pull the finish

center console you must remove the 2- 4 side screws and two screws in the armrest section inside or on the rear side of the console, slide it back and remove console then the radio. sometimes you have

Question about Pontiac Grand Am

1 Answer

remove the center console, you start in the back seats. Pull the ash tray out. There are 2 13mm nuts, remove those. You do NOT need to remove the one 13mm lock nut, that one holds the hand brake frame

Not finding what you are looking for?
1996 Pontiac Grand Am Logo

1,564 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...