...control panel. I've checked the tires and they all seem to have the correct pressure...I'm wondering how this warning light is sensing tire pressure and what I can do to remedy the warning coming on. ...
control and DIC controls and still no HUD????? Could the HUD just be B/O, and need to be replaced? or is there a reset sequence for the HUD control knob? If you peek down inside the windshield, you'll
replace the DIC button. Another possible cause is when there are issues with the driver door and the body control module (BCM). The only door that can turn off the radio during RAP is the driver's
...DIC works and the Service Vehicle Soon light comes on. The HVAC console will not work during all of this. Rear defroster and AC button do not work. Day-Time running lights, head lights, high beams, ...
DIC buttons and does not return until I start the car again. I found no faults in the on board computer i had the same problem and i had to replace the wheel height sensor or something along that line
...Replace the DIC and retest The Driver Information Center is different in the 1998 and 1999 models from the later years. Those have the common issue of the display going blank and the fix is to ...
...DIC) to the Compass/Temperature mode. Press both the E/M and the MODE buttons for at least 10 seconds until the calibration symbol appears. Release both buttons once the calibration symbol appears. ...
The dic display is stock You need to remove the control buttons and replace them.
...DIC ("Driver's Information Center") functions controlled by the 4 buttons on the lower 2 steering wheel spokes are working at all. Dealer says I'll have to have the entire cluster replaced, ...
...DIC buttons are located on the instrument panel, to the left of the instrument panel cluster. The DIC comes on when the ignition is on. After a short delay, the DIC will display the information that ...
213 questions posted
Usually answered in minutes!
405 Questions
54 Questions
49 Questions
22 Questions
32 Questions