2007 Cadillac CTS 3.6L "intake manifold gasket" Questions

...intake manifold is leaking. People at work indicated that the problem with the GM lower intake manifolds is that the manifold warps causing the gasket to leak, not so much a gasket problem. They ...

...Intake Manifold Gasket Does anyone know if this has been recalled- I am about to tap in to my unborn child's college fund and want to make sure I'm not getting screwed! Randy...There is no recall or ...

...intake manifold gasket of my pontiac grand prix GTP 1999, do I have to change the Supercharger gasket and what difference makes to install a thinner and a thicker gasket on the SC. Is there any place ...

...intake manifold bolts to get to all of the spark plugs. You don't have to disconnect all of the hoses going into/out of the intake, just remove the bolts and disconnect the small airbox in the front ...

...the intake manifold. That is why there is oil in the hose, excessive oil means a blocked EGR valve. Either clean the or replace it with new one. Hope that explains everything. Thanks for asking

...Intake manifold gasket and head gasket failures are two of the most common sources of internal coolant loss caused by engine wear. Unless you have serious DIY skills, I WOULD NOT attempt to repair ...

...intake manifold 3.8L Engine (most common)Upper Intake ManifoldTo Remove: Drain the cooling system. Remove or disconnect the following: Negative battery cable. Fuel injector sight shield. Air cleaner ...

...intake manifold gasket My 1996 land rover discovery is acting funny. It is driving fine, but the intake manifold gasket keep sweeling under the intake. What is causing this? oil from the pcv valve ...

...Intake Manifold Gasket Type V8 4 2 liter Intake Manifold Gasket Set 2 piece metal AJ85392 2005 Volkswagen Phaeton Intake Manifold 4 2L V8 Intake Manifold OEM Intake... Phaeton 4 2L V8 04 06 Audi VW 4 ...

...intake manifold supports.8. Remove support brackets at the intake manifold front corners and MTV.9. Loosen upper fastener attaching throttle body to support bracket.10. Remove clips attaching EGR ...