2008 Chevrolet Hhr "chevy 2006 start time" Questions

Chevy HHr LT 2006 model. The PS all the time off after a little drive. But, every time after start the engine it on /comm back/ again. It is happen all the time. The cod /service give me/ C0475.But ...

2006 chevy HHR 2.4L code P0011 ?? Potential SymptomsMost likely a P0011 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well

...2006 Chevy HHR LT? 1. Turn Ignition to Run, with engine OFF 2. Press info and reset buttons at same time to get to personalization menu 3. After that; press info button to scroll through menu until ...

...2006 chevy hhr has a rattle when shifting gears in automatic trans. why? What you are hearing is referred to as "chatter," and is a first warning of transmission trouble. If your vehicle has over ...

...2006 Chevy HHR I have reverse, neutral and park but no drive gears. I had the issue with the "pin" sticking at the time and removed the keys by pushing the button thru the small access panel. It ...

2006 Chevy HHR My ignition key is stuck in the ignition lock start with the shifter. a common problem is the shifter is not making connection with the switch to tell the car its in park. jar ( hit) ...

...2006 CHEVY HHR I wrecked my HHR on Monday 2/16/09. A lady turned left in front of me. I hit her in the side on my Passenger side. It was driveable. That same day I took it to the Body shop to get an ...

...2006 Chevy HHR. Coming home from work today the car ran fine until I stopped at a traffic light. With no warning at all, the car just completely shut off and the only light on was one that something ...

...chevy 2009 HHR. It only has about 400 miles and when we jumpstarted it the power steering stopped working and now we're trying to charge the battery but that is taking forever. Any ideas on what is ...

...out, then start the car. it'll stay off till it calucates that it needs changed again. most of the chevys you turn key to run position but don,t start then press the acelerator pedal to floor three ...