Bialetti Moka Express 6-Cup Coffee Maker "top" Questions

I cannot unscrew the top of the Mukka Express machine from the bottom! If the bottom is screwed too tight on the top, you could try to warm the with hot water and cool the bottom with cold. This could

i cannot unscrew the top...i have waited until cool and taken out the pressure valve...it still wont unscrew! help !! dip the top part upside down in warm water, make sure the bottom doesnt warm up, ...

...The handle of my 10 cup Bialetti Moka Express snapped today while I was trying to unscrew the top-bottom assembly. I tried removing the remaining handle piece from the top without success. Any ...

My espresso maker, a Bialetti, has its top very stuck to its base. How do I release the aluminum from the aluminum? It's like a jar top that's been GLUED to the jar!! i had the same issue. i ran the ...

...my Bialetti 12 cup yesterday and since then the water stays in the bottom and does not rise to the top. The sealer is properly put in. I have not done anything different. I removed the sealer rinsed ...

...it makes a full pot of espresso, but by the time it is done the espresso is boiling in the top chamber. Help! Flame is too high and the top is not screwed tightly enough to the bottom. Also ...

my bialette does not boil all the water to the top!!!!! I've changed the gasket multiple times, but only sometimes has the bialetti made a full chamber of coffee without hardly any water in the bottom

does the water go on the top or the bottom of the maker? The bottom. Do not fill past line.

Somehow the top got screwed on too tightly and we can't unscrew it! I tried soaking it in water in the sink. Any ideas? Heat it up a LITTLE BIT. Perhaps run it under hot water.

...a feeling there's a coffee ground stuck somewhere. Any thoughts on how to end that sound? Stove top coffee espresso brewers; have three compartments, the lower is a sealed water tank that once ...