2007 Lexus RX 350 FWD "300 having abs" Questions

300 and had the lower driver side ball joint replaced. After the VSC,ABS and VSC Off lights have remained on. check the connection to the wheel speed sensor, or that the sensor has not been pumped out

300. Why do brake light, ESP BAS light, ABS light, and traction control light turn on and don't turn off? No codes. CEL is not on. Doesn't seem to be driving any differently Possible failed abs sensor

...300 code u1120 and u0121 CODE U1120 AND U0121 Both of these have to do with the ABS system. U codes are lost communications codes from computers. Sometimes they are the wires. When you have different ...

...300 lx abs light is on we dont have KB cars in USA> but the ABS, means get the car scanned first , then check the brakes. ABS can NOT operate , bad brakes, but the scanner might say, sensor Right ...

...abs sensor as sometimes when i press the brake pedal it judders as though the abs has cut in and doesnt always brake very well i have the same problem. im told its the abs sensor ring. £300 to ...

300, but its not the abs light This light usually comes on if you have a failed wheel speed sensor but these vehicles are common for the ABS module to fail causing the same problem. You can back probe

ABS module...rebuild for $300 or $1000 for a new one + labor. You have a sensor at each wheel that is magnet. One of them is starting to go bad. The only way to found out which one it is, take the car

...abs doesn't work the traction control can't either. Based on past experiences my guess is you will find a wheel speed sensor fault code. They are fairly common failure items in GM models around those ...

I have a 1992 Mercedes 350sd I have an intermitted abs light at the same time the air compressor shuts off and the tach quits This model was made partial year 1991 to 1992 will need the ABS units and ...

se 300 1992 abs codes So, what ABS codes do you have?