...Amp! Power Acoustik PS2-1200 I've had a full audio system in my car for the past three years, including 1 two channel Power Acoustik amp that has recently stopped working. The power led is always ...
power wire and 6 gauge ground the amp b4 this was the mtx 8100d ya far cry from this one but never had this problem b4 help plz... and help or question email me plz ..11/23/08 [email protected]
...power and resistance you can just connect any old subs to a system you need to wire them depending on the load that the amp needs to see. first thing is to try the amp/s on a individual sub to check ...
...amp punches the bass, it draws extra power. If that power isn't available, it starves and shuts down (if only for a second) then restarts. The higher the gain, especially using a low pass filter, the ...
...amp an saw that a couple of wires were crossing so i cut some of the wire off and plugged it back in, then both of the amps started cutting in and out, but after they stopped the bass doesnt hit like ...
...amp is switched off and unplugged from the power first. You would have to take the chassis out of the cabinet and gain access to the under side (solder side) of the PCBs. You can then check for dry ...
...amp or to the power ground and see if it quits. Also unplug the RCA's and see if the thumping stops. Then you know it's the RCA's. If it does'nt stop make sure your amp is properly grounded. Try and ...
amp into the subwoofer got unplugged from the sub box and touched eachother.. i looked at my fuses, none were blown, but ever since then it made this heartbeat sound of a deep bass tone, then stopped,
32 questions posted
Usually answered in minutes!
21 Questions
10 Questions
9 Questions
9 Questions
6 Questions