Question about Sewing Machines
...presser foot pressure adjustment. Most machines do. It sounds like the pressure on your machine is set to the minimal or it is malfunctioning. http://makeitsew.biz/presser-foot-pressure ...
...presser foot pressure on Pfaff 2054 Pfaffs IDT without presser foot pressure sewing discussion topic... Pfaff 2054 good for quilting sewing discussion topic PatternReview com What is Pfaff IDT Feed ...
Question about Bernina Sewing Machines
...presser foot only raises slightly (about 2mm), it might be due to this safety setting. To resolve this, change the setting from the maximum of 2mm to a maximum of 6mm. Remember to switch it back to ...
Question about Sewing Machines
the presser foot is when "adjusting" the tension dial. However, to test the tension on fabric, the presser foot must always be Down. When threading the top thread, the presser foot should always be Up
...presser foot Instructions may vary by brand. I am assuming you are not trying to replace the mechanism. Here is advice on adjusting the presser foot as is done for different types of fabric, on a ...
...presser foot down? There should be an adjustment somewhere on the top of the sewing machine, above the presser foot where you can adjust the pressure of the presser foot - left for less and right for ...
...presser foot (You do not need to remove the screw). 2. Hook the prongs of the Zipper Foot around the presser bar from the back, and tighten the presser-bar screw. 3. If the raised edge (zipper or ...
Question about Singer Sewing Machines
Presser Foot Release Lever: First, check if the presser foot release lever is functioning properly. Sometimes, it may be stuck or not engaging correctly. Make sure it moves freely and isn't obstructed
...Presser foot pressure is adjustable. Open the head cover and look for the presser foot shaft behind the light. On most models there is a spring around the presser foot shaft that pushes on a collar. ...
Question about Bernina Sewing Machines
presser foot shank on the Bernina 790 Difficult to understand your question. Why would you need to adjust a presser foot shank? It should either work on your machine or not. If it is the wrong presser
371 questions posted
Usually answered in minutes!
764 Questions
337 Questions
223 Questions
181 Questions
150 Questions
