Dometic RM2652 Refrigerator "wire heat cool rv" Questions

...that your fridge also works on 12V so you will have two heating elements. The one with the yellow wires is the the 12V heating element, you do not have to remove that one. You must remove the other ...

...on with gas either. On the back side of the refrigerator to the right you will see a couple of wires going into a metal rod that is bent. That is the electric heating element. Grasp hold of the ...

...wire in a 120 V system. I would get to the compressor connection box and disconnect the power from the compressor and turn the circuit breaker on. If it trips, it's a wiring problem. If it doesn't ...

heat in the tube on both propane and electric but no cooling. can you be of any help on what I can do to fix this short of buying a ne one? Inside your fridge there are fins, on the far right there is

wire, thru a heat safety switch on the burner unit and it was open instead of being closed and cut off the main 12 volt supply to the control board. I connected a jumper wire around the new switch and

...RV Refrigerators and Parts for Sale Mine just did this. Turned unit off for a full 24 hrs. Then upon turning it back on it worked. First test the thermistor. It powers up by the light in the fridge. ...

...heat column. It will be round with two wires attached to it. In the center is a reset button. If this button does not restore power then the next step is to replace the wire coming from 12v supply to ...

...cool your fridge heating the ammonia and the electric heats by an element (similar to a water heater). Check continuity to your element. Follow the wires back where it comes out of the side of the ...

...the refrigerator. It is located in the tin stack on the right hand side. After locating these two wires, you must plug them in to a 110 Volt source. You can do so by cutting an old extension cord ...

cool If it works on gas and NOT electricity then the heating element is not getting power or the heating element is open. The heating element is located on the tubing just aft of where the pilot flame