HP Photosmart C7280 Printer "powers down" Questions

how to perform nvm for hp photosmart c8180 1.) Power down printer normally or unplug printer, wait for 60 seconds.2.) If powered down normally, plug printer in. Goto step #4.3.) If not powered down ...

printer cycles on/off and displays "improper shut down" user can not intervene in cycle of on/off, each time it cuts itself on the display reads "improper shut down, do not use power cord or power ...

C5180 0xc18a0307 can any help me with this error? Unplug the printer, then pressing the help and ok buttons simultaneously plug it back in. follow instructions on the printer display I tried many ...

error0xc18a0301 will not respond or operate. its says turn power off, then on,it dont matter Hold the help and the on button down at the same time, pull the power from the back and while still holding

my c309 photosmart is stuck in shut down mode just says "shutting down" can't turn off brose, Do a power cycle on your printer and it should hopefully fix your problem. To power cycle, follow these ...

HP photosmart C5180 all in one: Ink system has failed I got msg. Error: 0xc18a0001 Here's a link to a procedure that one individual used to fix the same problem with his printer. I can't guarantee ...

HP Photosmart PremiumC 309g-m started a day ago will not print anything even test page. Message says load paper into photo tray. Nothing obvious seems to work, shutting down printer and restarting, ...

My HP Photosmart 2710 keeps shutting down, either when printing, scanning, or sometimes just on its own. I can only get it to restart by removing the power plug from the power supply and reinserting ...

I first got a message saying "improper shutdown. Use only the on key not wall switch to shut down printer." When I tried to shut down the printer it would not work. I had to pull out the plug. take ...

Hey there, My printer still works great BUT when I power down my PC, the next day when I power up, the printer will not turn on unless I unplug the power source and plug it back in, then it resets ...