Gateway ONE GZ7108 All-in-One Desktop PC "chip card" Questions

can i add video card to a gateway all in one Probably not because the video chip is built-in on the motherboard.

...you need to install a video card. If that doesn't work then try swapping out the RAM. One of the chips may have gone bad. Do you hear any beeps when the machine turns

...chip level spare market) between the cpu/processor and the CPU Heat Sink *** fan..resit/fit it tightly in position.. 8) there may b a chance for m/b's crystal clock generator to b faulty..try ...

...chip handles Integrated Graphics, or a graphics card inserted into a PCI slot, or any adapter card inserted into a PCI slot. Anything to do with a PCI bus. It also handles IDE devices such as an IDE ...

...chip slot and try booting.I'm thinking that it might be your monitor because if the monitor was working and the video card was bad, you would get a No Signal message appearing on your screen.Try ...

...card or memory chip. If it is a chip, it goes next to the other memory chip in the slot. Must be right memory or the motherboard may fry out. If it is a memory card, you must have SD-MS slot. If you ...

...chip slot and try booting. This is a motherboard issue or video graphics card problem, disconnect video card if possible, if beeping stops you have found the problem. If no change! sub out the ...

Card chip built on the motherboad, which I believe it is with a Compaq computer), it is possible the video chip went bad or might be a RAM problem. You can try to open up the case (unplugged of course

...chip determines what Processors are used, what Ram Memory is used, and what High-speed graphics are used. AGP and PCI Express being High-speed graphics. Not a graphics card installed in a PCI slot, ...

...monitors screen for you to disable the on board video chip or video card, go to the CMOS setup by pressing del key. once there you can browse through the CMOS setup to disable the on board video