Question about Gateway Computers & Internet
...pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center ...
...looking for them near the motherboard battery and bios chip. if you change the jumper on the wrong pins then it is very unlikely you will do any damage, just put it back to how it was before
pins (labelled 1, 2, and 3), and look for a small "jumper" that is connecting pin 1 to pin 2. Move the jumper to connect pin 2 to pin 3. Wait 5 seconds. Move the jumper back to connect pin 1 to pin 2.
Question about Intel Computers & Internet
jumper to normal, Shut off your computer, open the side case and touch the metal to ground yourself before taking out the power cord.http://support.gateway.com/s/PC/310_Series/Shared/2520578/2520578mv
...jumper on pins 2 and 3 for clearing the passwords. Turn on the computer. Wait for an audible beep from the computer. A message appears stating that the NVRAM and password have been cleared. Turn off ...
gateway.com/s/MOTHERBD/MSI/2514316/251431601.shtml well i got to admit im stumped at this one.and mabey you have a solution or awnswer. The FSB jumper is not for the memory. It's for the CPU. Set that
...jumper, possibly labeled clear cmos. There are three pins, usually with a cap on the first two. Remove the cap from 1-2 and put it on 2-3. Then, put it back again. If you cannot find the jumper, then ...
...you set the jumper like that. However, this one does (Intel E210882) and when you save changes, it will tell you to power down and put the jumper back to "Pins 1-2" the way it was.I hope this
...see a maintenance menu. Use this to clear any settings. Turn off the computer. Swap the jumper again back to normal pins, start the PC and let me know if it works now. Best of luck Regards ...
...the cmos battery and or change jumper pin setting to start fresh in the bios settings.after removng the cmos battery,Make sure to put it back in before you re boot your computer. Good Luck ...
902 questions posted
Usually answered in minutes!
4,857 Questions
1,171 Questions
1,019 Questions
712 Questions
443 Questions
