Samsung 32 in. LCD Monitor TV "noise bang" Questions

...bang' and picture went out. The noise was more mechanical than the type of pop or snap you'd expect if a capacitor blew. The audio is still ok. Depends on the physical size of the cap; there are some ...

...bang noise no picture lot of lines on part of the screen Sounds like a blown capacitor within the power supply or inverter section if it banged then you should be able to visually see the damage. ...

...made bang noise and screen display turned off wont turn back on usually when the on off sensor goes bad it makes a loud click sound, if that's the case the only way to fix it is have it ...

/The tv makes a banging and crackling noise when switched on and it turns itself off and on for about five minutes before it works. It sounds that the backlight inverter board has damaged. Check and ...

...noise then picture goes out and comes back on. Now the picture will not come in at all. PROBLEM? Something snapped inside the set. Check for some capacitor that has just about blown itself up - they ...

...the dvd their is a loud clicking noise A warped disc will cause that as will a lump of debris on the turntable as it will make the laser travel to the end of its focus range and bang on its end

...noise, burning smell and tv down. Could this be the power board? Loud popping and loss of power is common on plasma TVs and is usually either the Y sustain or Z sustain boards or buffers; in these ...

...noise as if the telly was turning itself off then screen went black, atempted to turn it on by on/off switch as i did this the telly went bang and a flash from the back now wont turn on at all thank ...

if this machine is turned on after 10 seconds or so it emits a loud banging noise, as if the tape carriage is trying to eject the tape (which is not there) this happens about 10 times then the unit ...

...resulted in the green indicator light coming on for a short period of time, several "clicking" type noises and then a steady (not blinking) red indicator light and no action on the unit's screen -- ...