Amana Radarange Microwave Oven "turntable continues spin" Questions

...from time to time Remove the plate, and check if the square shaped gear that normally spins the turntable is rotating. If it is rotating, then replace the turntable gear. If it is not rotating ...

...turntable motor which will be directly beneath the oven floor. Inspect the belt that connects the motor to the rotating table. If the belt is broken, replace it. Touch the probes of a continuity ...

...turntable motor which will be directly beneath the oven floor. Inspect the belt that connects the motor to the rotating table. If the belt is broken, replace it. Touch the probes of a continuity ...

...turntable and the magnitron. Un plug the unit and check both fuses, you might get away with this cheaply. Please let me know if this helps. P.S. if one of the fuses continues to blow its time to get ...

...turntable motor which will be directly beneath the oven floor. 3 Inspect the belt that connects the motor to the rotating table. If the belt is broken, replace it. 4 Touch the probes of a continuity ...

turntable continues to spin. When you open the door a fan goes off but the turntable continues to spin. When you close the door the motor (seemingly a fan)kicks back on - whether you've entered a cook

...turntable, and fan work if the control board is bypassed follow this test and fix it. God bless you Exhaust fan motor If your exhaust fan motor is not running, there are a couple of things that you ...

...turntable motor but problem continues. When the Absolute Humidity (AH) sensor is defective (open or short), ERROR will appear in the display after 16 seconds. If ERROR appears check sensor wire ...

...continues to run, though the light is on and the fan is running but it is no longer heating the food or spinning the turntable. It can even just turn on when opening and shutting the door without ...

...turntable motor which will be directly beneath the oven floor. Inspect the belt that connects the motor to the rotating table. If the belt is broken, replace it. Touch the probes of a continuity ...