iRobot Roomba 530 Robotic Vacuum "stops brushes need cleaning" Questions

need to clean out around the motor, it may not be getting enough air to cool causing it to overheat and stopping. That the brush roll plate off, take out the screw, and the top will come off, then you

stops stating, "Please Clean Roombas Brushes." This occurs even after the brushes have been cleaned. Any advice? Same thing happened to me. After "cleaning" the brushes and emptying the filter several

...stops and the orange light flashes. It said it needed brushes cleaning so did that but no joy. When I turn the brushes manually there is no clicking so I think the brush drive gears are ok. Changed ...

...stops even when handle is in operational position. Is there an adjustment to a switch that can be made? Is it the actual motor stopping or the belt that spins the brush that's slipping? if its belt ...

...need to clean the brushes. if too much load it put on your brush motor--the unit will think that something is wrapped around the brush and slowing down the motor. if you have cleaned your brush and ...

Brush stopped spinning I have a Dyson DC 24 and the brush stopped spinning because it was clogged. I removed all of the hair etc. and replaced the brush, but it still is not spinning. Any suggestions?

...stops with a message to clean he brushes. I have cleaned the brushes and filter but to no availe the thumping continues. You also need to pull off the yellow bearings from the end of the brushes (one ...

...stops and light starts to flash. I have cleaned around the brush bar If cleaning debris from brush roll and nozzle housing doesn't solve the problem you may need a new PCB, if that doesn't solve it ...