Jenn-Air JGD8130 Gas Cooktop "burner light" Questions

...light the burner. I can manually light the burner with a match so there is gas coming thru. The other burners light fine. Also I'm on LP. Replace that ignitor on that burner only. Not drawing enough ...

...light Left burner does not apper to spark, but lights If you turn on both bruners they some times light??? The igniters for the burners are all on one circuit so when you turn the burner to light the ...

...light the burner. Normally when you turn the burner on you should here a snapping or sparking sound, at which point the burner should ignite. Here is a link to the user manual for 36" - 5 burner ...

Burner light does not go off on Amana AKT3040 I have an Amana AKT3040 and when I installed it one of the burner lights in the set of four in the middle of the unit always stays on. All four light will

...burner will not light After our stove was cleaned, a lot of cleaning solution was left behind. Now one of the burners will not light. We have removed most of the excess cleaning product. The other ...

...light front burner lights but rear burner will not light. powdered cleaner was used and may have plugged the holes. I have switched burners from the other side and it works so the igniter is not at ...

...light any another burner all the igniters keep ticking until you turn on THE particular burner. This one particular burner has the on/off extra low setting which is not working (does not cut on/off ...

...light when I turn on the burner. I have to manually light it with a match or lighter. It will stay lit while I'm cooking and all the other burners come on just fine. Do I need to call a technician? ...

...light the burner with a match, (this checks everything else) then the most common problem would be the burner holes in front of the pilot are clogged. When cool, remove the burner and inspect the ...

...burner on light on stove wont come off range is off but burner on light stays on After stove is turned off, the light stays on if burner still warm. If the burner never came on, then it needs to be ...