...blade will weight back to level. Usually the one on the oposite side of the one that rubs. Tape some quarters or fishing weights on the top side and keep adding until it quits. Once you get a chance ...
...housing. The blade no longer rubbed against the housing and the noise stopped. The bearings in the motor are probably failing/or dry.Locate the shaft of the motor going into it and spray wd-40 on it ...
...Blade Model 552 od-- SKU # 409-952---- MFG # 5A00007 SER # 720275940415653B The switch controls High,Medium,Low Speed and Off. 4 Wires--Black,Brown Purple and Gray are connected to awitch, they come ...
Turn fan on and extremly noisy. I have replace the motor using the same fan blades, but noise still exist. Any suggestion to the problem? You are in position to visualise the fault as the blades are ...
When the fan is on it makes a noise as if it is rubbing somewhere. The light is fine and the motor seems fine. Just some kind of friction that we are afraid to use it. Could be a simple alignment ...
...housing. does the unit just need some new grease or lubricant to fix the problem? hi, I wrote to a person earlier about oiling one, now Im thinking she may be having the same problem you have, I will ...
...housing and oiled. Put motor back to together. Loosened the blade hex screw and pulled the blades off. Gave the shaft a gentle tug forward, put on a washer, slipped the pex tubing (acts like giant ...
...three distinct speeds. Just found and cleaned it, but now it will not start up unless I spin the blades by hand 6-10 times to get it going. Seems like it is "sticking." Can hear that the ...
2 questions posted
Usually answered in minutes!
251 Questions
153 Questions
60 Questions
24 Questions
