Microsoft Xbox 360 Elite Console "disc tray" Questions

...disc tray on an original Xbox 360 console.Step 1: Remove the disc from the tray Step 2: Make sure the faceplate is on correctly The faceplate is the plastic piece on the front of your console. Press ...

...disc tray. To release the disc tray, push the paper clip into the hole to press the manual eject mechanism. The manual eject mechanism is a white lever that is visible behind the console casing. The ...

...disc tray. To release the disc tray, push the paperclip into the hole to press the manual eject mechanism. The manual eject mechanism is a white lever that is visible behind the console casing. The ...

...disc tray automatically ejects. When you place a disc (CD, DVD......) etc. The disc ejects automatically, without reading the disc! No matter what is tried, ie: switching off, restarting, changing ...

...disc tray on your Xbox 360 console by pressing the eject button. Any of the following things may cause this problem: There is a hardware failure that affects the console, the disk drive, or the eject ...

...disc tray Disconnect the power cord and any other cables connected to the console. Uncoil a paper clip. Position the console horizontally, as you would position a DVD player. Find the yellow sticker ...

disc tray disc tray only opens , after three or four attempts when clicking on to open tray, when clicking for tray to open theres a noise and then reads reading then back to open tray again after ...

...Disc Tray Loose My xbox disc tray is very loose. It wobbles alot.Sometimes the disc tray opens sometimes i have to open it. The main problem is that its so loose that its not reading any disc period. ...

...disc tray closes push down firmly on the top of your xbox where the tray is. if not clean your disc. When the disc tray closes push down firmly on the top of your xbox where the tray is. if not clean ...

...disc tray 3: Physically force the disc tray back in with force. Not so much that you snap the thing or knock it off its runners, but enough that the motors stop retracting the tray. The tray should ...