...pilot will not stay lit then replace it. If you aren't sure about placement of thermocouple you can heat thermocouple with a seperate heat source. If you do this and pilot light stays lit then ...
Question about Williams Heating & Cooling
pilot flickers replkaced ther-cup now pilot wont lite/stay lit. pilot wont stay lit Blow out the dust from the pilot and reposition the pilot where the flame hits the tip. more
...stay on If the pilot light will light at all but not have a good strong flame I would remove pilot assembly and clean it thourghly,being careful not to damage pilot orifice. Reinstall pilot and seeif ...
...stay lit Pilot lite won't stay lit Thermostat flame sensor. Do you see a little rod next to the pilot? That is what tells the main gas valve that the pilot is lit and it is safe to give gas. ...
...magnet. One or more of those is the problem. Oh...there is also a saftey switch...in case it tips over. It will also cause the pilot to not stay lit (if the switch or wires that go to i are
Question about Vanguard Heating & Cooling
...valve can wear out. Another thing is the pilot itself. Inside the pilot is a little rod that stays heated to ingnite the igniter. It can become dirty or corroded and won't allow the pilot to stay
...pilot won't stay lit. i reznor model# f125 pilot won't stay lit. i changed the thermocouple already. Make sure the pilot is clean (Blue flame fully enveloping the top portion of the thermocouple) if ...
Question about Stoves Heating & Cooling
Pilot won't stay lit There's a little screw that adjusts the pilot light. It is usually on the block with all the other valves. Follow the pilot lite supply line to where the screw probably is located
...stay on Pilot light will light and stay on but when main burner comes on it stays on for a few seconds and then something clicks and it goes off. I know I have gas pressure. I replaced the ...
...pilot light will not stay lit, I was told On a Monterey 35k-btu Top Vent Furnace Natural Gas (3509622) Williams The pilot light will not stay lit, I was told possibly a bad thermo coupler? Hi, this ...
195 questions posted
Usually answered in minutes!
10 Questions
5 Questions
1 Questions
1 Questions