Bosch Nexxt WTMC3521UC Gas Dryer "500 replace heating" Questions

500 series elec. dryer will not produce any heat, and the timing cycle keeps changing itself. Keeps going directly from 1hr.17 mins. directly to 20 mins, and so on...just keeps dropping the time left.

...500 electric dryer not heating CONSIDER THIS
BOTH LEGS OF AC MUST WORK TO GET HEAT FOR DRYER
Maybe you don''t have power to both legs of your receptacle. Both legs of the 220 volt AC have to ...

My Bosch Nexxt 500 dryer keeps tripping the hi-limit cut out. I originally thought the lack of heat was due to the heater part needing replacement, so we replaced it. The dryer worked, but the heat ...

...500 Plus Series Dryer, it turns on but there is NO Heat. I have recieved the Heating Assembly Box with Heat element, NTC sensor, and Thermostat. I removed the old heating box and replaced it with the ...

dryer wont heat my dryer wont heat up what should i do replace heater element

HI, I have a bosch 500 series dryer that keeps tripping the thermostat reset and then we get no heat. I reset it and it works for about 2 dryer loads and trips again and no heat. thermostat needs ...

...500 dryer will not dry clothing If you mean that it is not heating and stays cool, most likely the pilot sensing thermocouple needs replacing (if you have a gas drier with a pilot light) or the ...

...500 andjust replaced the heating element less than 6 months ago. A week ago it stopped heating up again. Took the back panel off, pushed the reset button but now when I turn it on, the electic panel ...

...cycle...hummm. Please help:) HI, seen this a lot when i was in apartment maintenance,it is most likely you need to replace the heating element.Could also be a bad timer but not as likely as

the Kenmore 500 will not produce heat as it blows a fuse (30 amp. time delay) but continues to work..when stopped, it will not start again until the blown fuse is replaced and then the same thing over