Cuisinart Brew Central DCC-1200W, 12-Cup 12-Cup Coffee Maker "1200 element" Questions

...1200 doesn't appear to use a thermal fuse but instead seems to use a NTC Thermistor. Like thermal fuses this is clipped onto the bottom heating element and has two yellow fine lines leading to the ...

...1200 coffee maker takes a long time to brew and it will only brew about 8 cups with 12 cups of water being used. Problem just started. Regular filter - no paper - not gold being used. All internal ...

...when I toggle it to on the red light does not come on. dcc 1200 bch It is possible the heating element is burnt out, or the safety fuse has been fried and is opened not allowing power to the

Heating element wont turn on Hello ches... when this happens your choice is to replace the heating element or replace the coffee maker. IF the coffee maker is three years old or more, seriously ...

hot plate cuts off there is a thermal detector strapped on the heating element check that, it is very small and has a metal band holding on it,the plate element is connected to a circuit board relay ...

Cuisinart DCC-1200 brewing temperature I want to adjust the brewing temperature on my Cuisinart DCC-1200 Hello ditommm, Not to worry, I think I can help. On the face of your DCC-1200, there are two ...

can one buy Cuisinart dcc 1200 coffee maker heater elements Hello handkrobbins, Yes, you can buy the heater elements but not from Cuisinart directly. You will need to find a small appliance repair ...

Heating element/brewer tube leaks, Where can I get a new one? Take the old one to any hardware store and match it up with a hose that is approved for potable water.

First it would only brew four of eight cups, then shut off. Now it does not even begin to brew. The light comes on, but no heat/brew. Bad heating element. Call the manufacture and order a new one

...1200 has only one element, that both heats the water for brewing and keeps the carafe warm. If you're brewing coffee then the element is fine and the suspect part is the Thermistor. Another forum ...