Samsung WE356A5W Washer/Dryer Laundry Pedestal "keeps getting water" Questions

Ad

Question about Maytag Washing Machines

1 Answer

getting an error code ... F-20. Please tell me what's wrong! :) Thanks! Hi, F20 indicates a water inlet problem (no water or insufficient water supply) in your washer. To resolve this issue check your

Ad

...keeps recycling (keep filling water without draining) until 14 minutes left then the timer gets stuck. Could switch lid cause that? When open the lid the machine stops. A lot of water gets in machine ...

Ad

...water level is set on superload, gets to rinse cycle and keeps filling. Will not finish cycle. don't know where the water is going when water level is set on superload, gets to rinse cycle and ...

Question about Kenmore Washing Machines

1 Answer

Water Just Keeps Filling! If I turn off the washer it just keeps filling and filling, the only way to get it to stop is to turn off the water supply to the machine. Even flipping the cycle to spin won

Question about Samsung Washing Machines

1 Answer

...water keeps running it may be being sucked out by siphoning through your sewer pipe .Probably a siphon problem . Check your drain hose to make sure hose is not stuffed too far down drain and air can ...

Question about Samsung Washing Machines

1 Answer

...water keeps running after cycle ends When rinse cycle ends the cold water keeps running. Your water inlet valve is sticking which means that it needs to be replaced. You can get it at your local ...

...and spin cycle it keeps the water running and in the off cycle. Your water inlet valve either is stuck open or not getting signal to close from control board. I would check your inlet valve

Question about Fisher Washing Machines

1 Answer

keeps stopping because cold water is out of the temperature range so I must push the water selection and start to continue the cycle (over a dozen per load!!!!!!). Is there a way of disabling the cold

Question about Washing Machines

1 Answer

water just keeps running but it never gets filled up because the water keeps draining out on the fill cycle. What could be wrong? On the drain valve there must be some dirt that does not let the valve

Question about Whirlpool Washing Machines

1 Answer

water keeps filling the washer wont go to the wash cycle keeps filling up If the washer keeps filling and overfilling then unplug the machine and see if the water still continues to come in. If this ...

Not finding what you are looking for?
Samsung WE356A5W Washer/Dryer Laundry Pedestal Logo

113 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...