Singer 7436 - INGENUITY "thread knotting near bobbin" Questions

thread keeps knotting up near the bobbin. the thread keeps knotting up near the bobbin on my older model singer Sounds like a tension problem. You may can email the singer company at talktous@singerco

thread is knotting Husqvarna Vicking - The bobbin thread is knotting up -- bobbin is threaded correctly but everytime the needle starts - little pieces of thread are cut and the thread is gets knotted

thread is loosely would on the bobbin at that point. You're best bet is probably to buy a new bobbin casing. They're usually about $25 or so and you should be able to find one on eBay by searching for

...THREAD KNOTTING UP MY BOTTOM THREAD KNOTS UP REALLY BAD. HOW DO I ADJUST THIS? THANKS! Check that it is threaded correctly (both top and bottom) making sure that the upper thread is in the takeup ...

...thread is knotting up Check that it is threaded correctly (both top and bottom) making sure that the upper thread is in the takeup lever. Watch the needle as you slowly turn the handwheel counter ...

thread seems knotted near the bobbin and I have trouble manually moving the wheel to clean it up. When only either of the thread or bobbin is present, the machine works though the motor sound is a bit

thread in the bobbin case, have gotten it to the point that it stitches but the bottom of the project is full of loops, not huge ones, but big enough if I try to turn the fabric it will knot up again!

near the needle. also, hold the thread that you threaded through the needle with the other strand on the left of the needle. hold them there for a few stitches... and wahla! no more birds nest. I have

...thread is entering the bobbin area, getting stuck on the spring, and causing it to bunch inside and knot. Any ideas?? I don't know if this is any help, but I would suggest taking it in to a repair ...

...bobbin is full of thread the tension has to be stronger than when it is almost empty. So tight when it's full and loose when it's nearly empty. I hope this helps. If this doesn't work try using a air ...