Question about Kenmore Washing Machines
...washing machine then you could have a sensor that is faulty . The fill sensor will communicate with the control board when the washer is full to turn off the water . The fill sensor needs to be ...
...washing machine. Add the baking soda mixture to the detergent container of your machine and pour the vinegar into the drum. ... Use a clean scrubber to rub around the opening of the washing machine, ...
...washing machine. Either you have low water pressure, or the water valve(s) at the wall aren't fully open, or (more likely) one of the water hoses are kinked or perhaps even defective. You should use ...
...water inlets are being used (hot and cold) even if you dont have hot attach a y hose the machine needs both inlets in use these machines use very low water usage but they still need a fill up ...
Question about Samsung Washing Machines
...washing machine that will not finish the wash cycle. I have a Samsung washing machine that will not finish the wash cycle. It returns a error code E4. The 4E (4C) error indicates that the washing ...
Question about Washing Machines
...washing machine available that can use low pressure? our well is gravity feed and has not much head so we have low pressure. Is there a machine made that will run with low pressure? It would have to ...
Question about Washing Machines
washing machine AW9790S show error code is E3-1,need solution to fix it 3. Toshib washing machine error code: E1 : Water discharge error. E2 : Safety lock error (Door switch). E3 : Laundry is unevenly
...Is this typical? If not, is there a way to adjust the amount of water in the machine during the washing and rinse cycle? this is normal the pic are all photo shop water you clothes are clean
...washing machine wm2277h has low water level during wash and rinse The water level is very low on front load machines. (Below the bottom of the door) While the washer is running, push and hold the ...
...washing machine has low my kenmore elite HE3 washing machine has low water volume For low water volume - or "Trickling" effect... 1. Turn off the water supply to both hoses. 2. Remove hoses (one at a ...
579 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
323 Questions
255 Questions