Question about Audio Players & Recorders
...record player and the turntable will not turn model 80m46-14 how do I know if it is the belt or idler wheel The turntable will need to be removed in order to carry out a visual check. Mostly the ...
...Remove one clip at a time, clean it and pinch slightly to ensure good contact. If the crackle is still present, wiggle the phono plugs, which connect to the amp, and check whether there might be a ...
...Remove the C-shaped clip from the center of the turntable. Lift the platter up and off. Find the flat rubber band that connects platter and the motor. Plug it in and verify that the motor turns when ...
Question about Crosley Audio Players & Recorders
...remove the disc in the centre of the platter. Under there you will find a cir clip that holds the platter in place. It may need a light tap on the spindle with a rubber hammer of piece of wood. ...
clip. Pull up on turntable while rotating back and forth. Remove turntable. Remove idler tire the same way you removed the turntable. Look for ID#s. Replace the tire. Google search or find it on eBay.
...record The turntable will need to be removed, the pladder should be taken off with the c clip to inspect the gears, I would not be surprised if the grease has gone hard and is interfering with the ...
Question about Crosley Audio Players & Recorders
...Remove the c-clip holding the platter to the center spindle. Remove the platter and turn it bottom side up, place the rubber belt around the platter and fix it to the little post sticking up on the ...
...Remove the small u shaped clip from the spindle. Use a small flathead screwdriver, and put it in the little gap between the clip and spindle to pull it out. 3. The platter should come free. On the ...
Question about Radio Shack Audio Players & Recorders
...remove the platter on my Realistic Clarinette 123 Record player with radio and casette deck. There is no clip and the olny thing in the middle of the player is a small black round object that turns ...
you have to take a small screwdriver and remove that clip, ( they call them jesus clips , because they fly off so be careful, so you don't have to think, Oh jesus, which is why they get the name :
181 questions posted
Usually answered in minutes!
146 Questions
83 Questions
90 Questions
66 Questions
69 Questions