Frigidaire Affinity ATF7000E Front Load Washer "pump clogged" Questions

...clogged, then the pump will need to be checked. Remove the hoses from the pump and use a flashlight to look into the suction port of the pump. Look for anything clogging the pump (like the occasional ...

...see a puddle of water appear under the washer due to a clogged pump. This can also happen if the pump itself is worn out and no longer working up to specifications.Best of luck with your repair. ...

could have an undetected clog in the drain hose or you could have failed/clogged drain pump. If the pump is not running in the drain mode then you could have a failed control board or a wiring failure

...pump to see if they are clogged. 1. Clogged drain line or water pump Check to see if there's something stuck inside the pump or the drain hose connected to the pump (pump is usually located at the ...

clogged pump at the impeller. Manually drain tub, remove front cover and disconnect hoses from pump. Remove pump from motor mount and look inside, small socks and womens thongs clog these all the time

clogged drain filter or drain pump. First make sure that the drain is not clogged and remove clogs if present. If no visible lint is present then remove the lower front access panel to check the drain

...Clogged drain pump - like the drain hose, debris gets jammed into the pump. It may take a while for the pump to accumulate enough debris before it clogs. Disconnecting the hose under the washer will ...

Machine is not draining The machine is not draining Before you call for service check the pump filter for objects. Not all washers are built the same but they all have one thang in common. A pump. ...

...blades are broken/missing or if the impeller won't turn freely, the pump is defective and will have to be replaced. Hopefully it is just a clogged drain line or pump. Hope this helped and best

... Hopefully it's just a clogged pump. Sorry for your trouble and I hope this helped. Best wishes. if hose wasnt clogged I would check the pump and see if it has a clog or could be just a bad pump ...