KitchenAid KSB560 5 Speed Blender "jar base" Questions

Ad

Question about Waring Blenders

2 Answers

base of the jar. i.e., atop the cutter and contacting the base of the jar. Charlie Its go between jar and cutter,or maybe the jar is cross thread. You need to make sure that the jar is sitting even on

Ad

Question about KitchenAid Blenders

1 Answer

...base Glass jar is leaking at base It will either be the rubber gasket (it goes between the glass jar and the blade assy) or it could be a worn bearing/bush around the chopping blade shaft. Replace ...

Ad

Question about Jenn-Air Blenders

1 Answer

jar detaching from the base.  Once it's loosened up, remove from the base and finish turning the bottom, manually. Before I found this method, I had tried everything to get the plastic bottom

Question about Hamilton Beach Blenders

1 Answer

...base from the jar, and check the placement of the gasket. Reassembly, with the jar upside down is gasket, blades, then base. While disassembled, rotate the blades by hand just to make sure that they ...

Question about Blenders

1 Answer

...jar base? In order to thorougly clean the jar you need access to remove the gasket, blade assembly, and jar base. It just unscrews CCW. If it has never been romoved it may be quite a task to get it ...

...jar and base are worn out and shaved down The female plastic piece on the blender base no longer meets the male plastic teeth on the blender jar. These are both shaved down. Machine works fine but ...

...jar on the base Oster Fusion 600W Blender No instruction manual came with my Oster Fusion 600W Blender. I can't figure out how the jar locks onto the motor base. Does it just sit on the base. All ...

...blender jar base or from the gasket being installed incorrectly. Make sure the gasket is installed between the blade assembly and the screw on base. If this does not help, please reply or

...base of our blender leave the blender jar on the blender. with one hand grab the glass jar handle with the other hand hold the base of the blender. then twist or push the handle counterclockwise to ...

Question about Back to Basics Blenders

1 Answer

...jar on the base and now the jar is stuck on the base...anything that might help? 1) Vinegar - apply vinegar to a rag and apply to any exposed areas - use a q-tip to dribble vinegar into hard-to-reach ...

Not finding what you are looking for?
KitchenAid KSB560 5 Speed Blender Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...