Celestron NexStar 5 SE (300 x 44.45mm) Telescope "telescope hand controller working" Questions

Ad

Question about Celestron Optics

1 Answer

...hand controller NOT in the telescope. Contact Celestron for a replacement hand controller or advice. http://www.celestron.com/c3/page.php?PageID=37 www.telescopeman.org www.telescopeman.us ...

Ad

Question about Meade Optics

2 Answers

...TELESCOPE Hand controller went completely dead while using it one night. Tried different battery packs. Will not light up. Check coiled cable continuity at both ends. ch'k ok. Red led still lights up ...

Ad

Question about Celestron Optics

1 Answer

...telescope recently stopped working. The altitude adjustment still works, however. Any ideas what to check when troubleshooting before we send it back for warranty repair? Send it back along with the ...

...telescope. NO! Nexstar hand controller do not work on TASCO telescopes. You bought a VERY VERY small 60mm telescope. You would have been better off buying 10x50mm binoculars as your first

...telescope/autostar not working ,will only display startup info on handbox ,then nothing happens !. This is sometimes caused by a bad hand controller cable and or corrupted firmware in the hand ...

Question about Meade Optics

1 Answer

...telescope powered by an ac adapter and power is going through. But everytime I press a button on the controller it does a quick *** and the power goes out for a second. Then it comes back The hand ...

...hand control isn't working properly. Haven't used the telescope for 12 months. I have replaced the batteries. When I try to align to a star or other object, the direction buttons only work in one ...

...hand controller cable. They fail regularly. If it still does not work then it is a problem with the hand controller or the internal circuit board. If after you replace the cable it still does not ...

Question about Celestron Optics

1 Answer

...Beyond that you can try to borrow another hand controller and try it. If none of these work, then you have a blown circuit inside the telescope. It will need to be returned to Celestron for

Question about Meade Optics

1 Answer

telescope, after automatic alignment the the hand box keys remain locked either on the cable hand box or with the wireless one. What can I do First thing to do is make sure you have good power-- fresh

Not finding what you are looking for?
Celestron NexStar 5 SE (300 x 44.45mm) Telescope Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Celestron Optics Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

Are you a Celestron Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...