program my bc355c scanner The BC355C is a factory pre-programmed scanner, and it cannot be programmed in the usual manner (entering and saving a frequency via the keyboard). You can, however, transfer
Question about Uniden Radio Communications
...program to transfer directly from Radio Reference. As far as I know, the BUTEL 996 package is the only one available to do this. You can find more information here: ...
...program the codes in and it isn39;t working. What am I doing wrong? Without knowing what you39;re doing, it39;s difficult to tell what you39;re doing wrong, but the first step is to refer to ...
...program this thing I have no Idea what I39;m doing it is a uniden bear tracker800 BCT7 The best programming instructions are in the factory manual that you can download and print, at no cost, here: ...
39;ve tried to program a frequency outside the scanner39;s tuning range. The BC60XLT top tuning range is the 512 MHz band, so you cannot tune any 800 MHz frequencies. For further information you can
Question about Uniden Radio Communications
...do I program extra channels in? I have the channels I want but just can't remember how to program them in the unit. Please help. Thank u Follow the instructions on page 25 of the
...39;ll need to program in the appropriate frequencies for your area. Your scanner is fairly simple to program, and the best instructions can be found in the factory manual that you can download and ...
program mode wired Your scanner should only enter the WIRED mode if you have a clone cable plugged into it. The only way to clear the problem is to RESET the scanner. Unfortunately this procedure will
Question about Uniden Radio Communications
..."Pgm."The channel number appears.Use the number keys and to enter the frequency you want to store, don39;t forget the decimal point.That39;s how simple it is to program.Hope this
58 questions posted
Usually answered in minutes!
227 Questions
212 Questions
153 Questions
103 Questions
104 Questions