Question about Sears LiftMaster Building Materials
working at the same time the wall mounted control pad started blinking. Why is the wall mounted control pad blinking and is this related to the remote opener not functioning? It is related. One of the
Question about Sears LiftMaster Building Materials
...for a bad wall control. You can easily verify this by removing the wire from terminal 1 on the rear of the motor unit. If your remote and keypad start working you will know the wall control is
...wall unit is failing , that makes the conection happen when the remote signal is recieved , ( it is recieving the remote signal but not sending it out to the control circuit for the motor ) SOUNDS ...
...wall console. Tried to erase all codes, but didn't work. Any suggestions? meerkat1 your receiver has quit working which is part of the logic board. The logic board runs around $80.00 for the part ...
...remote no longer works. I've changed the battery. The wall unit still works as does the outside key pad, but not having the remote work is a pain. Help! Press and hold the lock button on the wall ...
Question about Sears LiftMaster Building Materials
...working when the opener on the wall started blinking, I have checked the batteries in the remote I think something is wrong with the on on the wall. Help Press and hold the lock button on the wall ...
...working after long period After a long period of several hours the remotes and keypad will not open the door. Only the wall unit will. after wall unit is depressed the door opens and the remotes will ...
Question about Sears LiftMaster Building Materials
REMOTE CONTROLS WILL NOT WORK-WALL BUTTON FLASHING RAPIDLY I have a Liftmaster 1/2 HP Professional Line chain drive operator I am having a problem with. Mod. 41A4252-7 5/93 K1027 FCC HBW 0777. The two
...wall button or a remote with a sticking button. Or a remote in someone’s purse that gets the button pushed by other stuff in the purse. The test is to disconnect the push button wires at the power ...
Question about Sears LiftMaster Building Materials
...working and the wall switch garage door remotes suddlenly quit working and the wall switch started flashing. Door only works with the wall switch now - why? sounds like you had a power spike need to ...
5,971 questions posted
Usually answered in minutes!
0 Questions
