...reset the shredder.---- Toggle the On/Off switch at the back few times times.Then see if it gets reset.-------- Toggling it on and off to reset the shredder. Make sure to pull out the paper bin while ...
Question about Fellowes Office Equipment & Supplies
...reset switch? There are a couple of reason why A shredder will not turn on. There is a safety switch that makes sure the shredder is attached to the base. Make sure this makes contact and nothing is ...
Question about Royal Office Equipment & Supplies
reset switch? vf1700mx Royal I just talked to Royal technical support (off-shore call center) and they say that there is no fuse, no reset switch so the only solution is to take it to a service center
Question about Office Equipment & Supplies
...make or model...its hard to be exact..but...generally unless there is an obvios reset switch, if you have no power or lights then its possible the pcb inside is "fried" and would have to be
Question about Dahle Office Equipment & Supplies
...switch off automatically and it does not sense the paper. I have replaced the circuit because the older one was faulty,it wouldn't reset after resetting. make sure sensors are plugged in and ...
Question about Fellowes Office Equipment & Supplies
will not function. Once the paper is cleared, reset the SafeSense override switch to the right position. The SafeSense yellow light turns on when you touch or are too close to the paper insert opening
...Crosscut Paper Shredder? No reset button just unplug it or safely lift the top out of the trash can then the Disable/Safety Switch will make it stop (located on the right side towards the back of ...
...reset switch on the side - it is a slot with a red button. If you press this and it does not stay drpressed, the reset is shot and needs to be replaced My red safety button wasn't catching on the ...
Question about Shredder Office Equipment & Supplies
...on but the motor won't turn on. Hopefully there is a reverse switch, see if that will unclog. Possible the overload tripped a circuit breaker on the machine. If so reset and try the reverse
Question about Fellowes Office Equipment & Supplies
in the override (left) position, the SafeSense yellow light will flash and the SafeSense feature will not function. Once the paper is cleared, reset the SafeSense override switch to the right position
108 questions posted
Usually answered in minutes!
64 Questions
52 Questions
31 Questions
23 Questions
16 Questions
