HP Compaq Presario SR2011WM PC Desktop "computer not boot" Questions

...computer might have s recovery partition. Try SHIFT-F11 or CTR-F11 while booting your computer. If not you can try hitting F8 during boot and under advanced boot options select 'repair your

...However, this is not really a job for amateurs as there's a very good possibility you can permanently wipe the data on this drive or on the main boot drive of the computer you're using to test

...boot the computer from it. Press F2 when booting and go to the system BIOS where you are going to configure the boot order or the boot sequence and make the CD drive the first booting device, so that ...

boot from OS disc. Computer would not recognize drive. I attempted to boot from floppy drive and, again, computer would not recognize drive. I have had to do this before but was able to boot from both

computer on and start hitting the F8 keyAn Advanced Boot Menu will come up with an option to boot into safe modeRestore your PC to the date when its performance was good. Use a system utility software

boot the computer with one at he time and see if any of them is damaged.. In case the ram memory is damaged..the computer will actually not boot at all ..and will not show the device check on start ..

Boot from the XP disc and press R at the first screen. This takes you into Recovery Console. Run these commands: fixboot c: fixmbr exit The computer will restart and hopefully it will load Windows. If

...boot files. If you do not have a floopy you will have to get the CD files, there you have all the instructions how to get the CD. Once you get the files, insert the floopy or the CD and reboot your ...

...computer and boot. If that computer boots with your drive(s), the problem may be on the board or with the PSU (power supply unit). In either case, you'll probably be looking at anywhere between ...

...computer wont boot anymore when i turn my computer on it wont boot it says boot error insert disk i dont have a disk what can i do to fix the problem. Try going into safe mode by hitting F8 upon ...