SanDisk Sansa c200 MP3 Player "msc mode" Questions

MSC mode need to change from USB mode to MSC mode Usb mode is in settings push center button choose between msc or mtp.... MSC will allow you to see the expansion card mtp won't.....MTP shows you your

...MSC mode. Normally if we want to access the files of MP3 through the computer it advised that it should be in MSC mode. So ensure that its in MSC mode. Then connect it to the computer. If you want to ...

...msc mode.... make sure your usb 2.0 driver is installed....... Connect to the mother board.. MSC is best create a music1 folder and put music in there then there is no switching back and forth to mtp ...

MSC mode to get connected to the computer. Note: before disconnecting in MSC mode, always safely remove hardware (icon in the right corner of the computer screen below) When connected In MSC mode, the

...MSC mode to MTP mode? I changed the settings of my sansa device using the device manager in my computer to MSC but now I realized that I want it back to MTP mode! When I went back to the device ...

...MSC mode I had a problem with my E280, Bad tracks, couldn't delete, etc... I followed the advice given and reformatted and am starting from scratch...don't want to have the same problems. I'm ...

MSC mode: the operating system, seeing the player as a removable disk on "My Computer" 2. MTP mode: added software, when an extra program is started the player is detected in this application software

...MSC or MTP mode. Exceptions are Sansa Connect and Sansa Express which only use MTP mode. MTP mode is the recommended and default method for Sansa Players when used with Windows OS. The Sansa player ...

...mode or MSC mode (menu > settings > USB)? If it's in MTP mode, Windows Media Player should recognize it. If it's in MSC mode, it acts like a USB thumb drive. You should be able to add music in either ...

...MSC mode Sansa players can only be recognized by a MAC if the USB mode on the Sansa player is set to Auto Detect or MSC. Check in the System Profiler Open System Profiler from the Utilities folder, ...