Kyocera FS-C5030N Led Printer "paper coming back jam" Questions

...coming out. (Pulling the paper in the opposite direction is important for the printer's mechanism. Printer must be off). Never pull out paper from a printer when the printer is powered on. (If the ...

back but still cant locate paper if there is no paper inside then one of the sensors are broken thats why it is indicating the paper jam sign. check the fusing unit. the paper must be inside that unit

paper is coming out of the rear of the printer and not on the top where it always has. after every page that exits out the back, the lcd display says paper jam, but there isn't one. i have checked the

...paper tray came out, another tray will stop 3/4 of way out, there is a tab on each side, that you press in, one on each side of the rail, these are the bits stopping tray from coming out all the way, ...

...paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there. And gave the rode that the ink slides on a good clean and maybe a bit ...

...back cover paper comes out on its own Remove the paper from behind the back cover, then remove the paper tray and check for any other jammed paper. Once you've removed it all, turn the printer off ...

...taken the cartridge out & put back in several times ..NO LUCK.. HELP !!!!!!! Hello sir;Track back the paper you pull through you will find a senser either stuck or come off, put it back

back to paper jam press ok. Any ideas or is the printer heading for the bin? Hi, HP's All-In-One printers are notorious for their paper jams, and they are usually caused by small bits of paper left in

...back cover, paper tray, top cover, in fact everything I could remove to find this bit of paper. There is definitely no paper jammed, not even a microscopic amount, but still it says "paper jam". The ...

...coming up "reverse jam 1" i have checked paper tray, back cover and inside cover and no paper is jammed. each time i look, the printer prints out two pages, then comes up with the same message ...