Question about Toshiba Satellite Computers & Internet
...going. If the contrast buttons do not turn your lcd on, it could be the monitor itself. (One other thing...check for any Visible damages on the screen, ie. cracks or missing pixels (if you can
missing or corrupted on a black screen during startup or boot. 2. Computer switches to black screen after a period of use. 3. Monitor with no responses. 4. A black screen is shown with cursor flashing
Question about Toshiba Satellite Computers & Internet
...missing suspect the motherboard, also some of these have motherboard graphics card issues that can cause this issue, but since the external monitor works I'd say its not the graphics card. I hope ...
Question about Toshiba Satellite Computers & Internet
...missing her lap top Hi there! I'm a dad too!!! Try these simple steps... First, remove the battery and unplug the ac adapter then press and hold down the power button for 10 seconds to drain power ...
...monitor. More likely the problem is either LCD ribbon cable, or LCD display, the fact that the backlight is working means that the inverter is also working. whoever facing problem with Dell display, ...
Question about Toshiba Satellite Computers & Internet
...monitor with back lit only I can turn the netbook on, but all I see is a whit cursor on top left of the black sceen with back lihgt on. No bios showing at all and coputer doesn't boot. Please ...
...monitor just to see what it displays and it says "NTLDR is missing - Press any key to start" When I press any key nothing happens either!! THANKS FOR ANYTHING!! Based on what you are describing it ...
Question about Toshiba Satellite Computers & Internet
...missing. Hi, Since the laptop works on the external monitor, then it would be safe to assume that it is only the L:CD display part that is the issue. Often LCD display (of laptops) are working but ...
monitor and nothing appears on this either... Please help! Cheers, Shona When you first turn on the computer, start tapping the F8 key to bring up the safe mode screen. You have a very short window in
...monitor to the AVI and later on to the DVI port - no reaction - external TFT says no signal and goes to sleep modus. Switching the Fn + F5 or Fn + other F functions takes no effect. So I decided to ...
76 questions posted
Usually answered in minutes!
1,650 Questions
1,307 Questions
1,252 Questions
1,162 Questions
1,043 Questions