Epson Stylus R380 InkJet Photo Printer "missing line printing" Questions

...but pages of text have lines missing prints photocopies fine but pages of text from computer file have several lines distorted or missing Run a nozzle check to see if all inks printing out

...line, underneath it would be (very faintly) blue, red, orange and yellow lines. If I print an image it almost look 3D like. Can anybody help? The most common cause of horizontal banding is generally ...

line or so of text has a missing streak in the middle. ie across the page Do I need to clean something?? Check nozzle. Is there some lines missing? Do head cleaning procedure from peinter maintenance.

when printing lines appear when printing, if there is while line appear, please perform Nozzle check to see if there is any missing dot, if yes, perform head cleaning to unclogged your print head.

...printing and missing several lines - printing the top and near the bottom of the page only. What do I need to do? Try doing nozzle cleaning, hope fully this flushes the air bubbles trapped in the ...

...printing some lines printer has been sitting for a couple of years. now it seems to be hit and miss what it will print, missing lines etc Have you tried cleaning the heads? You can do this in ...

...missing top half, sometimes bottom half of line. Seems to have started after new black cartridge inserted - E711/891 You need to run the the setup software that came with the printer to line it up ...

printer will not print clear or lines missing. Went through with nossle check and head cleaning but still do not print clear. OK, you're going to have new ink jet cartridges to start with. I know they

EPSON STYLUS CX5500;-Document prints from file with whole lines missing-top of page, middle, bottom..same words consistently missing on font size 10pt-12pt-14pt..Prints from web page (images)ok. Tried

I have an Epson NX400 printer but the yellow and black ink test pages are showing gaps and missing lines. I replaced both ink cartidges twice and did the head cleaning and nozzle check but nothing ...