...lower agitator when turned clockwise but not counterclockwise. mine rotates without catching. i took off the bolt and agitator to see the the 3 'teeth catchers' are worn down. how to fix??? They are ...
Question about Washing Machines
model mvwc300vw1 lower agitator only spins clockwise under load splines are fine and nothing under it in tub Must be a dog underneath the machine is out of place.
...lower bottom mixer does but the center piece just wiggles a little. I can spin it freely with my fingers counter or clockwise. Is this normal? No. This is commonly caused by worn agitator dogs. The ...
...lower portion onto it to prevent the dogs from coming back out. Replace the agitator, and you should be back in business. This is my suspicion of your trouble. Hope it helps and good luck to you ...
Question about Kenmore Washing Machines
...Lower the hose to a bucket until it starts pouring water and empty the drum in this way. Next turn off and disconnect the water supply lines. Put a piece of carpet or a doormat on the floor and lay ...
...agitator to the lower portion. Again, making sure the two pieces align correctly. 10.Place the entire agitator assembly back on the gearcase shaft and reinstall center nut. NOTE: DO NOT over tighten ...
...lower half of the agitator moves. If the lower half works, you will need to change the dog kit inside the agitator. There is a 7/16" bolt under the agitator cap the will need removed to get the ...
...does not agitate in both directions. Can manually spin agitator clockwise, counterclockwise with some effort. Please advise troubleshooting steps. Thank You. lower gear box coupling has ...
Question about Washing Machines
...lower half as well. Also, under the softener cup, there is no access to to remove the agitator, so is this the kind I have to forcefully yank out? And does this seem like a worn/stripped coupler, or ...
109 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
398 Questions
323 Questions
