Panasonic PT-LB10E Multimedia Projector "cumulate" Questions

cannot start after new Lamp changed Press the MENU button to display the "MAIN MENU", and then select "OPTION". Press the ENTER button to display the "OPTION" menu, and then select "LAMP RUNTIME". ...

Panasonic PT LC76U Multimedia Projector Lamp how do i reset the timer press the MENU button to display the menu screen, and then press the UP and DOWN aero button to select the "OPTION" menu. press ...

indicator lights on, no function, no fan, no lamp Sometimes the lamp turns on for a few seconds without fan, green button turns red. Original lamp lasted less than 1800 hours. Was always used in low ...

Why does the projector keep going to standby mode? If the lamp usage time has passed 2 000 hours (when LAMP POWER has been set to NORMAL), the projector will switch to standby mode after approximately

PT-AX100U-EC DLP Projector: I replaced the bulb on the Panasonic PT-F1000NT pr... I replaced the bulb on the Panasonic PT-F1000NT projector. A *replace Lamp* message appears at the top left of the ...

I need to reset the lamp switch on the unit and display something on the screen. press menu button and go to "option" and press enter. go down to lamp runtime. Press and hold the ENTER button for ...

i just change the lamp but still the lamp hours shows the old timing HelloYou have to reset the lamp time after lamp replacement.  To reset lamp time follow these steps.[1]  Press the power ...

How do I reset the lamp hours on the Panasonic LB20u projector. Press the MENU button to display the "MAIN MENU", and then select "OPTION". Press the ENTER button to display the "OPTION" menu, and ...