lint filter? The vent hose filled up with wet lint. Georgia Number 10 is the dryer filter. Before each load the filter must be pulled out and the lint removed. If yall don't know about that filter
...should I do? Check for proper venting. If the lint filter or exhaust vent is clogged the clothes will be hot but still wet if there is a blockage in either the lint filter or the exhaust vent. ...
...lint filter" When I try to use the dryer (Bosch Nexxt), i first turn the dryer to the setting desired (regular or perm press, and time) it immediately has the "lint filter" flashing. When I press the ...
...lint may be bypassing filter. at same time, lint rolls up and falls off filter when filter is pulled for cleaning. Dryer stopped drying today - clothes were hot and wet. Disconnected vent hose from ...
...lint filter as well as inside where the lint filter goes. I removed the steam feeder thinking that's where the water was coming from but it didn't make a difference. There shouldn't be any water ...
...lint filter. too much gets past it and plugs up our dryer vent - therefore it takes way too many cycles to dry a load, driving up our electric bill - any suggestions? It may be that the lint catch ...
...lint filter that's on the top like mine, remove the lint filter and check for obstructions there, use a lint filter brush and clean well, this is often overlooked and a major cause of poor drying, ...
...lint filter itself can appear clean but actually be clogged up with the softener material from the dryer sheets. Clean all of the air ducts and passages with a crevice tool. Pull the lint filter and ...
...hose leading from the back of the drier. If there isn't proper exhaust from the lint filter to the outside of the house or apt. then the clothes will get hot but still be wet. Hope this helped ...
1,774 questions posted
Usually answered in minutes!
1,329 Questions
750 Questions
524 Questions
182 Questions
177 Questions