Panasonic Workio DP-4530 Copier "close" Questions

cover won't close after replacing cartridge opened lid to replace a cartridge; can't close cover remove cartridge, close lid \ can it close? YES put in old cartridge can it close ?

close section properly Bizhubc252- message on screen reading 'close section properly' (right hand side of machine as you are looking at it - bypass Try) Section is close but message does move and i ...

My Toshiba e-studio 233 copier is giving the error message, "Close side cover." Opening any cover to close again changes the message to "Close x" where x is the part opened, until ...

"Close the front cover" sign even the door is closed already I have a "close the front cover" in the panel board even the door is already closed. On Canon copiers the close front door can be caused by

...Problem: Cannot print. The error message "Door Open" appears on screen when all doors are properly closed. HI there, Follow the steps below: Step one: Close the print cartridge access door 1.Verify ...

...front door. There is something wrong with the front door, or the mechanisms that signal that it is closed. Closing the front door (the one that you open to pull out the toner and drum) all the way

i have a canon ir 400 the machine shows close the front cover but it is already close?what is the problem? Try to open and closed the front door several times,If the left cover and the front door are ...

...From the user guide:Cartridge Error (1102, 1203, 1204, or 120F)1 Remove the print cartridges, and close the cartridge carrier lids.2 Close the scanner unit.3 Disconnect the power cord from the ...

xerox phaser 7760 close door a in the display Display says close door a, when its closed. This is a very common problem with the 77X0 series. The lower left door magnets have come loose and won't hold