TCL LE32HDF3300 32 Inch LED LCD HDTV "power ic damages" Questions

Ad

Question about Hitachi Televison & Video

1 Answer

...IC FAN 7711.one power FET is gone off.when replaced the red light comes on and instead of the blue light coming on it comes and go.blue,red ,blue ,red in that order. replace the fan7711 ic  when ...

Ad

Question about Televison & Video

2 Answers

power supply board or main board or both. Most often the symptoms you mentioned point towards main board, however without testing and diagnosing, it would be difficult to predict the exact problem. If

Ad

Question about Akai Televison & Video

1 Answer

power ic damage Check and replace the power regulator IC. But, before replacing and power up, check all the associated components in the main power regulator circuit, and make sure, all of them are OK

Question about Hitachi Televison & Video

1 Answer

...power light come on and turns on and off with the remote any theorys please On SDR PWBs. some times, you may be able to see a hole or damage signs on them, or not. The continuity test on each IC will ...

Question about TCL Televison & Video

1 Answer

...power switch in for a couple seconds and release the tv comes back on, turns off in 10 minutes or so and the cycle repeats. its not the problem with ur electron gun tube or with any picture ic or ...

Question about LG Televison & Video

1 Answer

...replace the entire power supply! (because the damage may have caused other bad coponents do to that one ic exploding avoid a headache replace the entire power supply and start watching TV

Question about Olevia Televison & Video

1 Answer

...ON PATIO TILL IT GOT COLD OUTSIDE TURNED ON IN COLD ,WON,T POWER UP. Replace the power regulator  board as card basis.  Its oscillator IC has been damaged.  It can't be

Question about Televison & Video

1 Answer

...THE S-VIDEO CABLE.IT BLEW A BREAKER & AFTER THAT TV WOULDNT TURN ON. DO NOT HAVE MANUAL. You made a powerful short if you blew a breaker! There has to be damage to the circuit area that is related to ...

...power supply regulator board is faulty. Over voltage to T'Con board. Replace it and the T'Con board. Never switch on the set, without proper fittings to T'Con board. Its protective cover should be ...

Question about Vizio Televison & Video

2 Answers

Power board output +5V? 2. Is J1 (#19 in the right diagram)connector good? 3. Is DC-DC OK, check the voltage at J1 using a multimeter. 4. Is U4 (3.3V) working ok, U4 is an IC, you?ll need an IC tester

Not finding what you are looking for?
TCL LE32HDF3300 32 Inch LED LCD HDTV Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top TCL Televison & Video Experts

MegaByteMe
MegaByteMe

Level 2 Expert

143 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a TCL Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...