2wire HomePortal 1000HW DSL Modem and Network Router -1000-400210-000_LN_R (1000400210000LNR) "wire router power light stays" Questions

wire Router is not working My 2 wire router has 3 lights. When i first turn it on the power light blinks until it stays green. Then a few seconds later both the broadband link and local network lights

...router. Hey Have you checked your hot and neutral on the power plug ? With the ground prong on the bottom, hot is on the left (black wire in house wiring) and is bigger than the neutral slot on the ...

...our connections.. Have you reset the button on the back of the router? That may be the problem, if you haven't. Any time you lose power, you will need to check that, just automatically reset

...wire 1000sw The power to the modem/router keeps going off! When it is on it connects great to the DSL. It only stays on for about 3-5 minutes. Hi! Kindly check if you are using the same 2wire power ...

...router for 25 seconds, unplug and replug the power cord while reset is still pushed, then let go of the reset button once the power is plugged back in. Firmware upgrade: Click here to get the steps ...

power cord out of the back of the router, now using three hands, one to hold the router, one to hold down the little button switch (with the opened out paper clip) and the third hand to plug the power

...power light does not come on and ethernet 1234 and internet stays on how do i fix this? There is noway of knowing without seeing how you have it wired. If you can get on the internet and it works ok, ...

...wire modem power problem I use 2wire modem to connect the net. but this weeks i cannot online coz that modem power light indicator stay flushing on and on. seems like not stable for its supply power. ...

...router. Now I'm having trouble reseting it. Every time I try to reset it, the light just stays red and doesn't appear even trying to reset. What should I do? first unplug everything then wait 30 ...

my royter delink 602 stopped working Check all lights are working. If totally dead, check wires connected OK. Reset with pen tip or opened out paperclip while holding power in. All lights will stay on