Maytag PYG2300A Gas Dryer "fuse blowing" Questions

...cold air only . occassionally will complete cycle without blowing fuse , but not often. motor fuse never blows . thanks yes , occassionally though it will run for full cycle ....but not very ...

...blows main fuse Hotpoint TDL32 keeps blowing the main fuse check fuse rate on dryer if same rate. check dryer for amps if pulling to many will blow fuse, if dryer is ok check from plug in to

...blowing thermal fuse. What couild be causing this problem? hi, make sure you are using a time delay fuse and not a regular fuse. this may be the reason why the fuse keeps blowing out on your

...blowing thermal fuse. Vent is cleared. Humming sound when door is opened in mid-cycle--unless switch is moved to off. If not, fuse blows. The heating element is shorted to ground. You will need to ...

...blowing the one time fuse The dryer blows the "one time" fuse. Have replaced it twice. The motor is not binding. I would also replace the cycle thermostat mounted by the thermal fuse, I believe the ...

blowing heater fuse blowing heater fuse on any heat setting try unhooking the vent from the wall and running it. if it dont blow the fuse then it is a vent problem.

...blowing the thermal fuse.I've replaced all the thermostats and it still blows the fuse. thermal fuse blows as it has exceeded it temperature due to a venting issue, I would clean the dryer inside and ...

blowing 30 amp fuses, it is connected to a "pony panel" metal box with 2 30 amp fuses. It is itermitant problem. No problem in winter, summer seems to blow every other load. It is less then a year old

keeps blowing 15 amp fuses your dryer element is shorted to the element housing which is the same as ground and this will blow the fuses,remove the elements electrical connections and isolate the ...

...blowing fuse Kenmore 80 Series dryer keeps blowing L2 fuse (30 amp SB) cylindrical The element reads 9.4 ohms cold and there is no sign of arcing in the element enclosure. Please advise if its likely ...