Maytag HYG2460AWW Gas Dryer "fins loose" Questions

...loose fins, open door and locate the four screws that secure the front panel. Two will be thru the door hinges the other two will be on the opposite side of the opening. Remove the four screws. You ...

repair loose tumbler fin loose tumbler fin how do i tiighten maytag atlantis dryer Pop the top, remove the front, the drum will come free. Take pictures of how the belt goes around the motor. Fix your

...fins" on the interior of the drum in my dryer is coming loose. How do I gain access to the exterior of the drum to tighten the screws that hold the fin in place? It is beginning to make more and more ...

...drum by hand and tighten the screws on the fins. Take not however that some fins are only placed in by plastic snaps, and if it is loose it probably means that it is broken and will require

Fins inside drumare loose FDE7970EW1 Frigidaire Electric Dryer: The fins inside the drum have come loose and the edges of clothes are getting stuck in the gaps causing tearing and rust stains. How can

Loose fins- How do we tighten them or can't you How do you replace the fins in the dryer? You'll have to pop the top of the dryer. Insert a stiff putty knife into the split between the top & front

loose. how do I get to it to tighten it up? This isn't much help, but those fins will break off. I have had them break off. I am ordering some new ones, called "baffles" and will be installing them. I

...fins coming loose I have the exact same problem. On eof my fins has come completely off. The fins are attached with two screws but I can't for the life of me figure out how you screw them back on to ...

...fins in the dryer came loose and detached from the inside of the dryer. Now the dryer is losing heat where the installation holes are located. Can I purchase new fins and install them so the dryer ...

Loose Tumbler Fin In dryer I have a tumbler fin (maytag front load) that has come loose on one end-how would I go about fixing-would I have to order a new fin. I cannot use it at this time-as I think ...